^^^^thats better then a ram air with no box to shield it from the heat.^^^^

 

sure. ill be doing a snorkel in the next week or so it will be off

 

ATVracer76

I went ahead and built my control arm drop brackets but i need a measurement on how far it actually drops the control arm down. Would really appreciate if you could get me a measurement.

 

is it just a rule that everybody quit talking at once around here or whats the deal

 

well when we have nothing to talk about then yes.

 

See me and posjeepxj2 (original huh?) work on our jeeps daily. when we dont have money to buy parts, i make parts. I have tons of knowledge to share but know one wants to here it apparently.

 

snorkel got put on hold

 

Iam just gonna put up pics of random **** day to day

 

messing around on the ramp very entertaining

 

okay apparently iam not gonna put up random pictures cus its not working you guys got lucky

 

POSJEEPXJ...... I measured the drop brackets and they mount the control arm 4 inches lower then stock and the bracket itself hangs down 3.5 lower than the bottom of the stock mount. did you make mounts for the uppers? mine had upper relocation bracket built into it. they also go back along the frame to the t case mount and goes under the mount. i think that might be a whole nother piece. im sorry i havent gotten mine off. your still welcome to use them if you want.... im just running my butt off lately getting my quads ready for the season and works busy. if you can come up some night, i bet we could get them off pretty quick. idk, thought id throw that out there. if not, ill get them off someday soon enough......

 

o i got them built already just have drilled holes. the back braces(your seperate piece) will be built after i get them installed.





Im thinking about poof canning my jeep for now. Would that adversly affect the painting it later with actual paint?

 

well, if its not prepped right when you poof can it, it will make it way tougher when it comes time to do it right. plus, some rattle can paint can cause new paint over it to react and that can be a nightmare. not always but sometimes. i think you should do it right the first time and be done with it. thats my opinion anyhoo.

 

yea dont do it like me however i dont plan on ever actually spraying my **** however it would look good orange either way you should go with orange

 

any other opinions? Bright *** poof can orange or ppg hot rod black (flat black) sprayed by someone who knows what they are doing?