Just curious if anyone here knows of or them self's can weld, in the denver area, that would be willing to help a brutha out? Lifted my 2000 classic about 2 months ago and have major steering issues. After doing some research I found that doing a Flip or OTK kit will help/correct my steering angles and eliminate my bump steer and get it up out of the way. (still a DD and hwy driving is scary and not safe right now) Any how, im considering doing what the guy did in the below links. Seems very simple, but I do not have a welder nor do I have the skills. So, Im hoping someone on here might be willing to assist with the mod. Of course im willing to compensate, cash, beer, chicks... Ok, maybe not chicks. But yall get the point. Im very capable of most mechanical work, just not in the welding dept. so the reason im reaching out.

http://www.go.jeep-xj.info/HowtoOTKSteeringLinks.htm
http://www.go.jeep-xj.info/HowtoOTKSwaybarBrackets.htm
http://www.go.jeep-xj.info/HowtoOTKTrackbarBracket.htm

Thanks
Jared

 

There are a few vendors based out of CO. Not sure how close to Denver, though.

 

Own a drill? If so, you don't need any welding done to install a UTK steering System.

OTK will most certainly require welding.

How much lift do you currently have?
Tire size?

 

im at 4.5"s on 33's. the steering is currently utk. Im looking to go otk.

 

Before you commit to one versus the other...

https://www.cherokeeforum.com/f2/over-vs-under-31875/