Northern Utah BS thread
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
You will need a new fly wheel but your in luck I have a manual fly wheel/clutch just chillin you can have!
The only problem you might run into is the pilot bearing... they made them with 2 different size bearings large & small. If your manual uses the large one you would just have to press it into the crank output. If it need the smaller one you would need to press the bearing race in then the small bearing. The hard part would be finding a new bearing race from the dealer. (the race in your bad motor WON'T come out in one piece.)
The only problem you might run into is the pilot bearing... they made them with 2 different size bearings large & small. If your manual uses the large one you would just have to press it into the crank output. If it need the smaller one you would need to press the bearing race in then the small bearing. The hard part would be finding a new bearing race from the dealer. (the race in your bad motor WON'T come out in one piece.)
Last edited by builtnotbought89'; Apr 5, 2012 at 01:16 PM.
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
You should be able to bolt your flywheel/clutch onto it. But Like stated above You would have to figure out the throw out bearing deal... But even if you get a manual you may have to switch it if it doesn't match yours.
Senior Member
Joined: Oct 2009
Posts: 859
Likes: 0
From: Hyrum,UT
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
Senior Member
Joined: Oct 2009
Posts: 859
Likes: 0
From: Hyrum,UT
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
So I bought a truck last night! it has a fiberglass tonou cover on it that I would like to get rid off. it is on a 02 dodge but it is the new body style, let me know if anyone is in need of one. not sure what it is worth.
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Shut up tristin I'm trying to get these parts outta my garage! (I can't throw away a perfectly good clutch, but I guess I could toss the flywheel haha)
CF Veteran
Joined: Nov 2011
Posts: 1,179
Likes: 0
From: Lehi, Utah
Year: 90' 93'
Model: Cherokee
Engine: 4.0
On the auto I think there is a centering bearing you need to take off. Then the clutch stuff bolts on.
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Aug 2010
Posts: 1,326
Likes: 0
From: Huricane, Utah
Year: 1994 Ford Bronco
Model: Cherokee
Engine: 351 W
Holy Crap what I would do for $3800 buck's right now!!!!http://www.ksl.com/index.php?nid=218...lpid=2&search=
I hope you don't sell it Cory so I can buy it in a couple month's
I hope you don't sell it Cory so I can buy it in a couple month's
CF Veteran
Joined: Aug 2009
Posts: 1,535
Likes: 0
From: Eagle Mountain, Utah
Year: 1994
Model: Cherokee
Engine: 4.0
Hmmmm... Fit my 06? Although I like my leather roll up. Gets it out of the way quick.
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Sep 2011
Posts: 1,354
Likes: 0
From: vernal, utah
Year: 1995
Model: Cherokee
Engine: 4.0
dev daddy! i think you just opened my eyes with your engine woes... i just put two and two together; my motor mount and the thud i hear and feel when i hit the gas while it's in 4wd. i'm pretty sure the engine is hopping on that worn out mount. i don't want the same thing to happen. i just hope i haven't put too much strain on it already.
Senior Member
Joined: Oct 2009
Posts: 859
Likes: 0
From: Hyrum,UT
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
CF Veteran
Joined: Dec 2010
Posts: 2,366
Likes: 0
From: Spanish Fork, Utah
Year: 1989
Model: Cherokee
Engine: Renix 4.0L
Originally Posted by fathan16
dev daddy! i think you just opened my eyes with your engine woes... i just put two and two together; my motor mount and the thud i hear and feel when i hit the gas while it's in 4wd. i'm pretty sure the engine is hopping on that worn out mount. i don't want the same thing to happen. i just hope i haven't put too much strain on it already.
CF Veteran
Joined: Aug 2009
Posts: 1,535
Likes: 0
From: Eagle Mountain, Utah
Year: 1994
Model: Cherokee
Engine: 4.0