Senior Member
Quote:
Alright thanks!Originally Posted by jmaxj
sorry guess i was a bit vague. front lines. and i'm not sure about autozone but i know napa and checker carry them. for the rear i think durango lines are the longer ones you'd want but can't remember off the top of my head.
Quote:
Quick question, does your steering seem normal under normal driving conditions?Originally Posted by Celticclove
Hey guys ..... Ever time I do a u turn I get,a loud squeak / screech noise and the jeep starts to pull away from the direction I am turning well more like a hopi guess what do I need to replace to fix this?
Senior Member
Alignment is off a lil be sides truning sharp and u turns its ok ...... It just stated doing this after I changed my front coils
Senior Member
Quote:
I'll keep an eye out for them next time I foto the jyOriginally Posted by Desert Rat
I know a rear from a Dakota 4x4 works well!
Quote:
If you did not align it after the coil swap it sounds like a trip to the alignment shop would be a good first step to figuring it out. It will either fix the problem, or at least rule out alignment as the problem.Originally Posted by Celticclove
Alignment is off a lil be sides truning sharp and u turns its ok ...... It just stated doing this after I changed my front coils
CF Veteran
Baby Linken is home now, I am so glad to not be at the hospital anymore
Quote:
Originally Posted by A.T.R.Offroad
Baby Linken is home now, I am so glad to not be at the hospital anymore
A toast to Mom, Dad & Linken.
CF Veteran
Quote:
mine did that... after changing the ball joints and getting an alignment it went away. don't know if it was the alignment or ball joints or both that cured it though. it sounds just like a toe in or toe out problemOriginally Posted by Celticclove
Hey guys ..... Ever time I do a u turn I get,a loud squeak / screech noise and the jeep starts to pull away from the direction I am turning well more like a hopi guess what do I need to replace to fix this?
Junior Member
Three or four Jeeps are gonna be going to mini Moan tomorrow if anyone wants to join! We're meeting at the chevron at 10 a.m. The more the merrier!
Banned
Bought a new BBQ got home went to put receipt in file and seen the cashier didn't ring it up. Do I go back and pay or buy the locker ? Hummm
CF Veteran
Quote:
Karma will make it right. But that's a tough one. What store did u buy it from. If its a local store go back. Walmart... F themOriginally Posted by Tobyxj
Bought a new BBQ got home went to put receipt in file and seen the cashier didn't ring it up. Do I go back and pay or buy the locker ? Hummm
CF Veteran
Quote:
well, you can be honest and call them out on there mistake... Or take the opportunity to make a personal gain while risking the wrath of karma... that choice is all yours! Originally Posted by Tobyxj
Bought a new BBQ got home went to put receipt in file and seen the cashier didn't ring it up. Do I go back and pay or buy the locker ? Hummm
Senior Member
Quote:
Honesty is king, man! Go back and do the right thing, I say.Originally Posted by Tobyxj
Bought a new BBQ got home went to put receipt in file and seen the cashier didn't ring it up. Do I go back and pay or buy the locker ? Hummm
If there are any "well they should have caught it" believers out there, you know you would not put up with it if you were double charged
By the way, were you buying a bunch of other stuff as well? How did it go unnoticed so long? A missing 100-200 dollars usually pops out
CF Veteran
Quote:
Also Deven said his Creepers didn't alow enough flex and where binding. would have to conferm with him but at one point he said he didn't like them....
I am going to run 1 1/4 hiems for what its worth. andI think you only need to grease a crappy joint
I'm running ruff stuff heims at one end and creepers joints at the other end and have no binding or anything out of them. I've even slammed them hard on rocks with no issues. How's his geometry?Originally Posted by Gorillaxj
I would agree with above. IMO If I where going with JJ's I would only buy currie's, for hiems I would only buy Ruff stuff. just my thoughts after some of the BS I've seen and gone threw... Its not worht skimping on joints.Also Deven said his Creepers didn't alow enough flex and where binding. would have to conferm with him but at one point he said he didn't like them....
I am going to run 1 1/4 hiems for what its worth. andI think you only need to grease a crappy joint
CF Veteran
Quote:
Well, IIRC he is running the ford radius arms with the cast wedge/bushings on one end and creepers on the other So I could see them binding as they are the only twist point... but over all IDK.Originally Posted by jmaxj
I'm running ruff stuff heims at one end and creepers joints at the other end and have no binding or anything out of them. I've even slammed them hard on rocks with no issues. How's his geometry?