Northern Utah BS thread
Senior Member
Joined: Apr 2011
Posts: 564
Likes: 0
From: SLC ut
Year: 1996
Model: Cherokee
Engine: 4.0I
Originally Posted by jmaxj
sorry guess i was a bit vague. front lines. and i'm not sure about autozone but i know napa and checker carry them. for the rear i think durango lines are the longer ones you'd want but can't remember off the top of my head.
Thread Starter
CF Veteran
Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Quick question, does your steering seem normal under normal driving conditions?
Thread Starter
CF Veteran
Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
If you did not align it after the coil swap it sounds like a trip to the alignment shop would be a good first step to figuring it out. It will either fix the problem, or at least rule out alignment as the problem.
A toast to Mom, Dad & Linken.
CF Veteran
Joined: Sep 2011
Posts: 1,354
Likes: 0
From: vernal, utah
Year: 1995
Model: Cherokee
Engine: 4.0
mine did that... after changing the ball joints and getting an alignment it went away. don't know if it was the alignment or ball joints or both that cured it though. it sounds just like a toe in or toe out problem
CF Veteran
Joined: Apr 2010
Posts: 2,209
Likes: 3
From: st.george utah
Year: 1996
Model: Cherokee
Engine: l6 4.0
Originally Posted by Tobyxj
Bought a new BBQ got home went to put receipt in file and seen the cashier didn't ring it up. Do I go back and pay or buy the locker ? Hummm
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
Senior Member
Joined: Jan 2010
Posts: 855
Likes: 0
From: Taylorsville, UT
Year: 1999
Model: Cherokee
Engine: 4.0L
If there are any "well they should have caught it" believers out there, you know you would not put up with it if you were double charged
By the way, were you buying a bunch of other stuff as well? How did it go unnoticed so long? A missing 100-200 dollars usually pops out
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
Originally Posted by Gorillaxj
I would agree with above. IMO If I where going with JJ's I would only buy currie's, for hiems I would only buy Ruff stuff. just my thoughts after some of the BS I've seen and gone threw... Its not worht skimping on joints.
Also Deven said his Creepers didn't alow enough flex and where binding. would have to conferm with him but at one point he said he didn't like them....
I am going to run 1 1/4 hiems for what its worth. andI think you only need to grease a crappy joint
Also Deven said his Creepers didn't alow enough flex and where binding. would have to conferm with him but at one point he said he didn't like them....
I am going to run 1 1/4 hiems for what its worth. andI think you only need to grease a crappy joint
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
Well, IIRC he is running the ford radius arms with the cast wedge/bushings on one end and creepers on the other So I could see them binding as they are the only twist point... but over all IDK.