Northern Utah BS thread #2

Subscribe
Aug 24, 2012 | 10:07 AM
  #451  
Except you guys will have to say..."off like a heard of purple turtles"
Reply 0
Aug 24, 2012 | 01:25 PM
  #452  
Man this thread is dead nowadays
Reply 0
Aug 24, 2012 | 01:52 PM
  #453  
Quote: Man this thread is dead nowadays
Yep! forum is kinda lame now...
Reply 0
Aug 24, 2012 | 02:30 PM
  #454  
Yup.
Reply 0
Aug 24, 2012 | 05:42 PM
  #455  
Yep
Reply 0
Aug 24, 2012 | 06:28 PM
  #456  
So I'm buyin a new steering box to use for my hydro, but I'm in a toss up on whether to get a Durango box or stick with the stock one. Reason being that I will be using a 2" ram which will be slower then a 1.5" ram. Since the Durango box takes less turns to go full lock to lock I figure it will makeup for the delay in the bigger ram... Anyone with more experience with hydro please chime in ha
Reply 0
Aug 24, 2012 | 07:10 PM
  #457  
Quote: So I'm buyin a new steering box to use for my hydro, but I'm in a toss up on whether to get a Durango box or stick with the stock one. Reason being that I will be using a 2" ram which will be slower then a 1.5" ram. Since the Durango box takes less turns to go full lock to lock I figure it will makeup for the delay in the bigger ram... Anyone with more experience with hydro please chime in ha
If it were me I'd stick with the stick box and then get a smaller pulley for the pump. That way you can still turn great and have better than stock pressure.
Reply 0
Aug 24, 2012 | 07:15 PM
  #458  
Quote: Man this thread is dead nowadays
i wouldn't be caught dead on this site
Reply 0
Aug 24, 2012 | 07:16 PM
  #459  
Quote:
If it were me I'd stick with the stick box and then get a smaller pulley for the pump. That way you can still turn great and have better than stock pressure.
Thanks Derek, do you think the 2" ram will be very slow?
Reply 0
Aug 24, 2012 | 07:21 PM
  #460  
i wish i would of done an engine swap on this thing back in the day instead of selling it for 100 bucks. it was pretty sweet other than no power. it even had a diamond shifter ****.

 

Reply 0
Aug 24, 2012 | 07:36 PM
  #461  
Quote:
Thanks Derek, do you think the 2" ram will be very slow?
No it shouldn't be to bad, my buddy uses a 2" ram on his buggy and it don't seem too much different than most the smaller ones.
Reply 0
Aug 24, 2012 | 08:01 PM
  #462  
Okay thanks for the info!
Reply 0
Aug 24, 2012 | 08:55 PM
  #463  
I weighed my jeep at work today. Who can beat it?

Northern Utah BS thread #2-forumrunner_20120824_195450.jpg


Reply 0
Aug 24, 2012 | 09:30 PM
  #464  
Quote: I weighed my jeep at work today. Who can beat it?

Attachment 139474
i can! once i get all my doors off and chop the top, maybe even the bottom too
Reply 0
Aug 25, 2012 | 01:01 AM
  #465  
Well got a welder im starting on my mud flaps so I can be legal im due for saftey end of the month
Reply 0