CF Veteran
Quote:
it kinda looks like a stock shaftOriginally Posted by jeeperzcreeperz
Im still planning on going who build your shaft lol slyco or tom woods
Senior Member
Quote:
Im still planning on going who build your shaft lol slyco or tom woods
GRS rebuilt itOriginally Posted by jeeperzcreeperz
Im still planning on going who build your shaft lol slyco or tom woods
Cold and boring today. Man it sucked going to work today after six days off.
CF Veteran
Quote:
I been working out in the snow for 8 hours.Originally Posted by Mr Talon
Cold and boring today. Man it sucked going to work today after six days off.
CF Veteran
Alright anybody here know anything about chrysler
My wife has a chrysler pacifica and when she went out yesterday morning went to stsrt it and all it did was crank then she put the throttle to the floor and started right up
Ran just fine after then after work now that the car is cold again crank crank no start again but this time ran the battery dead so I went and rescued her I put my jumper cables on the car and let it charge for a second and did not start for me again so I pulled the mass air flow sensor out and it was clean I cleaned it anyways.
So as soon as I went full throttle again it fire right up but ran ruff I think its because she flooded the dang thing. Because after that it ran fine after it starts the first time it starts up just fine after that so I let it sit in the garage over night and went out this morning and crank no start again.
There isnt any codes in the computer I dont even know where to start with this one
My wife has a chrysler pacifica and when she went out yesterday morning went to stsrt it and all it did was crank then she put the throttle to the floor and started right up
Ran just fine after then after work now that the car is cold again crank crank no start again but this time ran the battery dead so I went and rescued her I put my jumper cables on the car and let it charge for a second and did not start for me again so I pulled the mass air flow sensor out and it was clean I cleaned it anyways.
So as soon as I went full throttle again it fire right up but ran ruff I think its because she flooded the dang thing. Because after that it ran fine after it starts the first time it starts up just fine after that so I let it sit in the garage over night and went out this morning and crank no start again.
There isnt any codes in the computer I dont even know where to start with this one
CF Veteran
Oh and I have checked ever chrysler forum out there and google for this and I find is to check the battery and grounds and I have everything is good
CF Veteran
Just crashed the girlies wrangler. Slid off the road at about 55 head on into a boulder and telephone pole and came to a complete stop. The bumper I built for it took 90% off the impact, and I must say, it saved the rest of the jeep. Ill post some pictures tomorrow.
Junior Member
Quote:
Crazy are you ok? Let's see that bumperOriginally Posted by dev_daddy
Just crashed the girlies wrangler. Slid off the road at about 55 head on into a boulder and telephone pole and came to a complete stop. The bumper I built for it took 90% off the impact, and I must say, it saved the rest of the jeep. Ill post some pictures tomorrow.
CF Veteran
Yes we are okay. My door hit the pole but I didn't get hurt. From impact, her knee hit the dash and crushed it, but she's alright too. Bestt part is, after all that, drove the jeep right out of the ditch and all with a foot of snow. Didn't even get stuck!
CF Veteran
Quote:
No the corner of that bumper took it all. That's 1/4" thick tight there and lool how it just peeled it apart. Also, that d-ring mount is 1" thick 1018 cf steel, and it smooshed like butter. The frame kinked a little... and fenders and drivers door is destroyedOriginally Posted by fathan16
did the tire take the impact? are the tie rods all good?