Four Corners BS thread!!
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
Its ALIVE!!!!!
Got my jeeps engine wrapped up around 1 am this morning. Started first try and runs smooth as butter!!
Took all of 12 hrs to remove and replace the engine!
I did find that I need a new radiator. I found that there was just water in the cooling system, so I suspect the engine and rad both went out due to freezing. One of the freeze plugs on the block was also half way pushed out.
As soon as I get my new camera software installed I will post up pics.
Got my jeeps engine wrapped up around 1 am this morning. Started first try and runs smooth as butter!!
Took all of 12 hrs to remove and replace the engine!

I did find that I need a new radiator. I found that there was just water in the cooling system, so I suspect the engine and rad both went out due to freezing. One of the freeze plugs on the block was also half way pushed out.
As soon as I get my new camera software installed I will post up pics.
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
I didnt work last night, so I passed out at 9! Working until about 12am tonight/tomorrow......and Im actually taking the weekend off!!!! I need some rest before I get burnt out.

Putting in my new rad, header panel, and fender tonight.
CF Veteran
Joined: Jun 2009
Posts: 3,071
Likes: 0
From: Denver, CO
Year: 1997
Model: Cherokee
Engine: 4.0
lol @ those lca mounts.. that's crazy josh! that's why i ordered some weld in brakcets for mine. beefier than stock. from zone offroad for $30.
had been healthy all winter and now tryin to get over this cold! hate hate hate!
had been healthy all winter and now tryin to get over this cold! hate hate hate!




