Four Corners BS thread!!
CF Veteran
Joined: Dec 2010
Posts: 1,876
Likes: 1
From: Colorado...BAILEY,CO...BYATCH !
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Yep that's probably what I'll be getting and then making it full auto ...I just have a desire to hold a rifle ,and fire it full auto ...And I've heard the local bikers out at the gun range here in the national forest popping off full auto before ,and I'm wanting the same toys now ...lol
CF Veteran
Joined: Dec 2010
Posts: 1,876
Likes: 1
From: Colorado...BAILEY,CO...BYATCH !
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Not worried about that up here ...full auto rounds can be heard at the gun range very often ...remember I live in the hills ,city boy .
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
shakedown run went great yesterday. jeep didnt slip a tire and flexes like a beast.
this was my first time wheeling on a y-link long arm setup. i have to admit, its WAY different than all the four link long arms i have built!!
its kind of bouncy up hills and i did notice it unload a bit on steeper climbs.
bent something in my steering cuz my steering wheel went from 12 o'clock, to 2 o'clock position by the end of the day. pretty sure its my draglink from over flexing it. looks like im gonna need a drop pitman arm. (have one in the garage, but oriellys doesnt have a loaner puller big enough for the job)
this was my first time wheeling on a y-link long arm setup. i have to admit, its WAY different than all the four link long arms i have built!!
its kind of bouncy up hills and i did notice it unload a bit on steeper climbs.
bent something in my steering cuz my steering wheel went from 12 o'clock, to 2 o'clock position by the end of the day. pretty sure its my draglink from over flexing it. looks like im gonna need a drop pitman arm. (have one in the garage, but oriellys doesnt have a loaner puller big enough for the job)
E-Z!!
Use a cheap puller and tighten it as much as possible. Open your hood and place a long piece of tube on top of the pitman arm and give it a good solid whack with a 4lb hammer. a few hits and the arm will come right off.
Use a cheap puller and tighten it as much as possible. Open your hood and place a long piece of tube on top of the pitman arm and give it a good solid whack with a 4lb hammer. a few hits and the arm will come right off.
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
Will do frank. Just gotta get a harbor frieght puller.
Thread Starter
CF Veteran
Joined: Jan 2009
Posts: 3,513
Likes: 0
From: Aurora
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Originally Posted by apache
a little behind on the bacon express trip this year. where is it going and who all is going on it.



A Romanian AKM47 underfolder (7.62x39) $514 and 1000 rounds for $250.

.....hmmmmmm, my axles will be in by then.