Four Corners Colorado, New Mexico, Utah & Arizona

Four Corners BS thread!!

Thread Tools
 
Search this Thread
 
Old Jun 24, 2011 | 12:11 PM
  #2086  
ColoradoJeepXJ's Avatar
CF Veteran
 
Joined: Apr 2008
Posts: 1,052
Likes: 2
From: Lakewood, Colorado
Year: 1990 2dr base
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by Grolla42
July 22nd-24th? July 26th is my birthday! I want to go but I'm 4", 31s and locked rear only
You could do Chinaman with that and I'd watch you try Carnage.
Reply
Old Jun 24, 2011 | 12:24 PM
  #2087  
Grolla42's Avatar
CF Veteran
 
Joined: Oct 2010
Posts: 1,191
Likes: 1
From: Aurora, CO
Year: 1988
Model: Cherokee
Engine: 4L I6
Default

Watch me try lol I'd probably use my sliders a lot then, doors and fenders as well I've never tried either trail
Reply
Old Jun 24, 2011 | 01:47 PM
  #2088  
ColoradoJeepXJ's Avatar
CF Veteran
 
Joined: Apr 2008
Posts: 1,052
Likes: 2
From: Lakewood, Colorado
Year: 1990 2dr base
Model: Cherokee
Engine: 4.0L
Default

Chinaman has lots of lines, you can make it as easy or as hard as you want to. I’ve only seen the entrance to carnage and it looks insane.
Reply
Old Jun 24, 2011 | 02:04 PM
  #2089  
Hooligan Off Road's Avatar
Former Sponsor
 
Joined: Jul 2010
Posts: 1,022
Likes: 2
From: Lyons, Colorado
Year: 1992
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Grolla42
July 22nd-24th? July 26th is my birthday! I want to go but I'm 4", 31s and locked rear only
I've seen people run it with less. Any rocker protection??
Reply
Old Jun 24, 2011 | 02:45 PM
  #2090  
XJSETH's Avatar
Thread Starter
CF Veteran
 
Joined: Jan 2009
Posts: 3,513
Likes: 0
From: Aurora
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Default

Originally Posted by pitbullxj

I've seen people run it with less. Any rocker protection??
My jeeps is about ready I'll go. Towing with the new roe rig
Attached Thumbnails Four Corners BS thread!!-image-1957596277.jpg  
Reply
Old Jun 24, 2011 | 03:52 PM
  #2091  
Grolla42's Avatar
CF Veteran
 
Joined: Oct 2010
Posts: 1,191
Likes: 1
From: Aurora, CO
Year: 1988
Model: Cherokee
Engine: 4L I6
Default

I only have sliders and rear diff cover.
Reply
Old Jun 24, 2011 | 03:55 PM
  #2092  
Grolla42's Avatar
CF Veteran
 
Joined: Oct 2010
Posts: 1,191
Likes: 1
From: Aurora, CO
Year: 1988
Model: Cherokee
Engine: 4L I6
Default

The entrance is a lil intimidating. I was looking at it and watching videos and just planning how I would get the first 50 ft haha
Reply
Old Jun 24, 2011 | 04:26 PM
  #2093  
XJSETH's Avatar
Thread Starter
CF Veteran
 
Joined: Jan 2009
Posts: 3,513
Likes: 0
From: Aurora
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Default

Originally Posted by Grolla42
The entrance is a lil intimidating. I was looking at it and watching videos and just planning how I would get the first 50 ft haha
Carnage or chinamans?
Reply
Old Jun 24, 2011 | 05:07 PM
  #2094  
MallCrawlXJ's Avatar
CF Veteran
 
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
Default

Originally Posted by djlarroc
I need to get the jeep out and dust it off.. I need to pull those pucks off. What's easiest way to do that? I don't think my hi-lift will go high enough lol

Dustin, what are you doing to your jeep? Curious to hear your build!

oh its all secret!

i threw some 35's on her. just waiting on some long arms from the brown guy so i can lift her up a little more. i think im gonna get my gears, lockers, chroomo shafts, high steer, ect done thru the summer(in my full widths) and just wheel on the stock axles for now. got some bilstein shocks, and some other junk. still need to buy a sye and d-shaft and its on.

should have it on the 6.5'' la kit next weekend. yes, thats right, i bought a kit! i will spend my time building the cosmetics/armor instead.

so i will be building sliders and a new rear bumper with swingout soon.

im out for wheelin in july. mom comes in town in a coupe days for two weeks, and going on vacation right after that.

here is a pic of my truss and some mounts on the d44



upper and lower control arm bracket are on now. just didnt get any pics.

i think the jeep looks super goofy with 3.5 inch lift and 35's. i will snap a pic later.

Last edited by MallCrawlXJ; Jun 24, 2011 at 05:10 PM.
Reply
Old Jun 24, 2011 | 05:10 PM
  #2095  
ColoradoJeepXJ's Avatar
CF Veteran
 
Joined: Apr 2008
Posts: 1,052
Likes: 2
From: Lakewood, Colorado
Year: 1990 2dr base
Model: Cherokee
Engine: 4.0L
Default

I would bet Carnage.

Nice truck Seth, yours? Also, did you check the 30, is it bent?
Reply
Old Jun 24, 2011 | 06:17 PM
  #2096  
FlemingXJ's Avatar
Senior Member
 
Joined: Dec 2009
Posts: 735
Likes: 0
From: Ft. Collins, Co
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Default

Originally Posted by hudfabxj
oh its all secret!

i threw some 35's on her. just waiting on some long arms from the brown guy so i can lift her up a little more. i think im gonna get my gears, lockers, chroomo shafts, high steer, ect done thru the summer(in my full widths) and just wheel on the stock axles for now. got some bilstein shocks, and some other junk. still need to buy a sye and d-shaft and its on.

should have it on the 6.5'' la kit next weekend. yes, thats right, i bought a kit! i will spend my time building the cosmetics/armor instead.

so i will be building sliders and a new rear bumper with swingout soon.

im out for wheelin in july. mom comes in town in a coupe days for two weeks, and going on vacation right after that.

here is a pic of my truss and some mounts on the d44



upper and lower control arm bracket are on now. just didnt get any pics.

i think the jeep looks super goofy with 3.5 inch lift and 35's. i will snap a pic later.

My oh my. Do you have a build thread going for this excellent start? And i assume this is for the 4 door right?
Reply
Old Jun 24, 2011 | 07:53 PM
  #2097  
MallCrawlXJ's Avatar
CF Veteran
 
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
Default

yes on the build thread https://www.cherokeeforum.com/f46/fa...machine-92580/

no, i gave up on the 4 door. building my 2 door.
Reply
Old Jun 24, 2011 | 08:00 PM
  #2098  
99rockies's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 867
Likes: 0
From: Colorado
Year: 1992, 1996
Model: Cherokee
Engine: inline 6
Default

Bacon maple donut. Fuking delishous!!! And I vote cmg beginning of August
Attached Thumbnails Four Corners BS thread!!-image-1490434313.jpg  
Reply
Old Jun 24, 2011 | 10:32 PM
  #2099  
Grolla42's Avatar
CF Veteran
 
Joined: Oct 2010
Posts: 1,191
Likes: 1
From: Aurora, CO
Year: 1988
Model: Cherokee
Engine: 4L I6
Default

Seth- I was talkin about Carnage
Reply
Old Jun 25, 2011 | 12:05 AM
  #2100  
XJSETH's Avatar
Thread Starter
CF Veteran
 
Joined: Jan 2009
Posts: 3,513
Likes: 0
From: Aurora
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Default

Originally Posted by Grolla42
Seth- I was talkin about Carnage
I'll roll carnage or roll on carnage.
Reply



All times are GMT -5. The time now is 02:03 AM.