Denver bs thread
CF Veteran
Joined: Jun 2009
Posts: 1,059
Likes: 0
Model: Cherokee
I ran 35km2 with steel rims and spacers for a year. With a ARB locker. Stock shafts and brand new spicer u joints. I wheeled pretty hard. Never once broke a shaft or u joint. Just know how to wheel man. Don't be scared. I always carried spare shafts. I wore out unit bearings a lot but no biggie. You will be fine dude.
Junior Member
Joined: Aug 2011
Posts: 62
Likes: 0
Model: Cherokee
CF Veteran
Joined: Dec 2010
Posts: 1,876
Likes: 1
From: Colorado...BAILEY,CO...BYATCH !
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
I just do stuff quick, so it looks cheap and easy!.....It was far from!...I should have just linked it out back.....hudfab rear coilover conversion, coming in the fall....and prob gonna slap some coilovers up front too. I want shock hoops thru my hood!!!
I made some new additions to the XJ last night.........Prob my favorite mods to date.......
Im gonna be ready for a shake down run VERY soon!! Who wants to come!!!??? I plan on hitting something semi easy and close.(to me)
I made some new additions to the XJ last night.........Prob my favorite mods to date.......
Im gonna be ready for a shake down run VERY soon!! Who wants to come!!!??? I plan on hitting something semi easy and close.(to me)
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
When is Danny gonna be done with the monster XJ? LOL
HEY CHAD!?! I saw pics of you wheeling the MTRs......Did you decide not to return them?
I was just reading the COTM rules and apparently, I cant enter since Im a vendor. Booooooooo!
Last edited by MallCrawlXJ; Jun 1, 2012 at 07:22 AM.
CF Veteran
Joined: Dec 2010
Posts: 1,876
Likes: 1
From: Colorado...BAILEY,CO...BYATCH !
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
It should be done shortly just needs to widen the base of the upper links and make them more level and paralrell with the lowers...But in the end it's not going to work any better than a wristed radius...4-link with trac bar...3 link with trac bar ...But the 42's got me set of 43-44's this winter.
Former Sponsor
Joined: Jul 2010
Posts: 1,022
Likes: 2
From: Lyons, Colorado
Year: 1992
Model: Cherokee
Engine: 4.0
Former Sponsor
Joined: Jul 2010
Posts: 1,022
Likes: 2
From: Lyons, Colorado
Year: 1992
Model: Cherokee
Engine: 4.0
Oh Yea here is some more footage from Indy Memorial day weekend. Seth, Me and my buddy Roger in a TJ. Team Frameless and Shameless represented hard!
CF Veteran
Joined: Apr 2010
Posts: 4,339
Likes: 1
Model: Cherokee
Originally Posted by hudfabxj
When is Danny gonna be done with the monster XJ? LOL
HEY CHAD!?! I saw pics of you wheeling the MTRs......Did you decide not to return them?
I was just reading the COTM rules and apparently, I cant enter since Im a vendor. Booooooooo!
CF Veteran
Joined: Apr 2010
Posts: 4,339
Likes: 1
Model: Cherokee
Originally Posted by 1tonxj
I'll go to spring creek on a weekend ...Danny wants to try out his double tri link front and 42's ... I'm just wanting to see how well I do against him running 14+ inches of lift and 42's while still running the dinky Boggers ...By comparison to him I am LCOG...lol
CF Veteran
Joined: Dec 2010
Posts: 1,876
Likes: 1
From: Colorado...BAILEY,CO...BYATCH !
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
It's atleast 14+ he had 14 but he put raised coil pads on the 60 when he bracketed it , But I doubt he'll roll it easy it's about 110wb abd 87 wide , And he's about 4 inches above my exo cage halo ...But looking those 42's got me wanting the 44's ...lol.
CF Veteran
Joined: Apr 2010
Posts: 4,339
Likes: 1
Model: Cherokee
Originally Posted by 1tonxj
It's atleast 14+ he had 14 but he put raised coil pads on the 60 when he bracketed it , But I doubt he'll roll it easy it's about 110wb abd 87 wide , And he's about 4 inches above my exo cage halo ...But looking those 42's got me wanting the 44's ...lol.