LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
CF Veteran
Joined: Mar 2013
Posts: 1,332
Likes: 0
Model: Cherokee
So I'm making some light bar mounts for my 50" light bar and I have pieces ready to weld.
Well I keep laying down practice beads with my flux core and I can't lay a clean enough bead (for my OCD) to actually install on my XJ.
Will anyone let me or lay down four 2" beads for me? Just don't wanna have to spend $100 to swap tanks right now for the $10 I've got into the mounts!!!
Well I keep laying down practice beads with my flux core and I can't lay a clean enough bead (for my OCD) to actually install on my XJ.
Will anyone let me or lay down four 2" beads for me? Just don't wanna have to spend $100 to swap tanks right now for the $10 I've got into the mounts!!!
Seasoned Member
Joined: Mar 2013
Posts: 304
Likes: 0
Model: Cherokee
So I'm making some light bar mounts for my 50" light bar and I have pieces ready to weld.
Well I keep laying down practice beads with my flux core and I can't lay a clean enough bead (for my OCD) to actually install on my XJ.
Will anyone let me or lay down four 2" beads for me? Just don't wanna have to spend $100 to swap tanks right now for the $10 I've got into the mounts!!!
Well I keep laying down practice beads with my flux core and I can't lay a clean enough bead (for my OCD) to actually install on my XJ.
Will anyone let me or lay down four 2" beads for me? Just don't wanna have to spend $100 to swap tanks right now for the $10 I've got into the mounts!!!
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
So in need of a little help. I have this weird rattling noise/feeling in my front end. I've checked all the basics(steering, track bar, driveshaft) I have no sway bar. Also I just replaced wheel bearings and all 4 ball joints. Anybody have any input?
Seasoned Member
Joined: Jun 2012
Posts: 448
Likes: 0
From: las vegas, nv
Year: 1998
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Jun 2012
Posts: 448
Likes: 0
From: las vegas, nv
Year: 1998
Model: Cherokee
Engine: 4.0
Try jacking up the front end and see if anything is lose? Double check to make sure everything is tight since the axle swap?
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system