LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
CF Veteran
Joined: Mar 2013
Posts: 1,332
Likes: 0
Model: Cherokee
Ya I like hearing real world reviews, I am not in the least bit unhappy with my adj. short arm kit, just lookin for like the design, does bind a lot stuff like that. IRO is out, I have it down to RC and Serious Offroad. I like how the come with the integrated skid and not $1000. Lol
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
Bolt is drilled and tapped. I was drilling for 4 hours until my dad decided to show up out of no where with some new drill bits. Less than a minute with a new bit and the 3/8" bit was all the way through. 7/16-14 tap and now I have all the bolts in. Reset my front pinion angle and double checked the torque, adjusted the sway bar discos and took it for a spin again. Now my rear is creaking and squeaking... it never ends haha
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
I have IRO. Just finished the install. I think Jon has it too. Install was easy, caster is easy to adjust. I just have the long arm upgrade though. Maybe next weekend I will test it on a trail run and be able to give a review.
CF Veteran
Joined: Jul 2012
Posts: 1,185
Likes: 5
From: Pahrump, NV
Year: 1996
Model: Cherokee
Engine: 4.0L
Senior Member
Joined: Apr 2013
Posts: 673
Likes: 1
From: Sin City
Year: 1998
Model: Cherokee
Yup I will be going iro long arms very soon as well just waiting on my next paycheck...I checked out the set up on driver x's rig and it looked more than capable...but we'll see after he tests it in the trail. Also been checking online for any real negatives but the only people that dislike the kit are those who don't own it
Senior Member
Joined: Apr 2013
Posts: 673
Likes: 1
From: Sin City
Year: 1998
Model: Cherokee
And since we are all showing off our lowers, I got a new frontier armory lower with magpul accessories that's been sitting in my safe...don't know whether to just sell it to fund the jeep project or build it so I can have another ar...
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
Crossmember is solid. Caster is easy to adjust with a big *** crescent wrench.
Night and day difference with long arms. Not just IRO but any manufacturer, over short arms.
I retained my LCA mounts for now. If it gets in the way, I will cut them off.
Night and day difference with long arms. Not just IRO but any manufacturer, over short arms.
I retained my LCA mounts for now. If it gets in the way, I will cut them off.
