LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
CF Veteran
Joined: Jun 2009
Posts: 1,415
Likes: 1
From: Las Vegas, NV
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by njbozic
Wash the brake dust with Brake cleaner that should stop the squeaky brakes.
99% of time squeaky brakes are cause of brake dust trapped inside the drums .
CF Veteran
Joined: Jul 2012
Posts: 1,185
Likes: 5
From: Pahrump, NV
Year: 1996
Model: Cherokee
Engine: 4.0L
Who was I next to on Craig?? Doorless 2-door, green diff. Cover?? Lol I was in a Mazda tho. Unnoticed.
Last edited by SoCalxJ4.0; Nov 9, 2012 at 09:41 PM.
Senior Member
Joined: Apr 2012
Posts: 954
Likes: 1
From: Vegas
Year: 1992
Model: Cherokee
Engine: I6
Now thats what I call an action shot lol.
I'm in the no rear brakes club. one of the cylinders finally gave out on the d35 so I just capped off the lines... It will be way less economical to rebuild those brakes than to do an 8.8 swap so I am just holding off.. at least my rotors and pads only have a few hundred miles on them haha.
anyone down to wheel on monday? I wanna get out and do a trail
Or even tomorrow but it would have to be in the evening
Holy crap, RC cars have changed a lot since I raced them!
I'm in for a run. Depending on the date.
With my really noisy pinion bearing and squeaky brakes.
And I got my steel tail light housings from one of my customers. Molded after the ones I gave Ocho, without the side markers so I can run a different light there instead (2 round marker lights instead of the 1 rectangular marker). These are rough housings and will need some modifications to make them sit flush, as they are just a basic box design with no curves or mounting holes drilled in the tabs. They are bare steel now, thinking of painting them the same color as my XJ. I will post up pics later once I get them cleaned up.
I'm in for a run. Depending on the date.
With my really noisy pinion bearing and squeaky brakes.
And I got my steel tail light housings from one of my customers. Molded after the ones I gave Ocho, without the side markers so I can run a different light there instead (2 round marker lights instead of the 1 rectangular marker). These are rough housings and will need some modifications to make them sit flush, as they are just a basic box design with no curves or mounting holes drilled in the tabs. They are bare steel now, thinking of painting them the same color as my XJ. I will post up pics later once I get them cleaned up.
anyone down to wheel on monday? I wanna get out and do a trail
Or even tomorrow but it would have to be in the evening
Last edited by The_ocho; Nov 10, 2012 at 10:05 PM.
Senior Member
Joined: Apr 2012
Posts: 954
Likes: 1
From: Vegas
Year: 1992
Model: Cherokee
Engine: I6
Originally Posted by zrocool
When and Where?
Junior Member
Joined: May 2012
Posts: 79
Likes: 2
From: Henderson, NV
Year: 1988
Model: Cherokee
Engine: 4.0L
Well California has been fun so far and i still have about a week or so left here. no wheeling yet for me. I blew my rear main and now ive been stranded at the house for the last week waiting for a friend to bring me parts. but hopefully tonight she will be back on the road and can get some wheeling done up in the mountians.
