Looking for a spot to put a handful of aux switches. What's a good spot to mount them to and what ideas do you guys have?

Planning on knocking the rock lights out today if can be done.

The GM harness needs to be modified. I'm going to be sending it out because I HATE wiring.

Ah, wiring is my gig lol so I'd offer to help.

Does anyone have a combustion leak detector I can use

The shipping weight of them for 5 was 43 pounds. It's 3/16 plate so not enough to care about haha

I got mine off prime4x4.com but I just seen dirt bound makes switch panels as well

Any of you guys add a aftermarket coolant temperature gauge and sensor if so where I'd you put the sensor

My fans were controlled by a separate sensor. I put mine in the heater hose with an autometer adapter

This:
Auto Meter 2280 Heater Hose Adapter https://www.amazon.com/dp/B000N8F0P4..._G145wbAE8W97A

if it is just a sender for the gauge and you don't need the stock gauge or light, you could replace the temp sender on the back of the head. The one on the front of the motor in the tstat housing is for the computer. There are several options such as what Photojared posted.

If anyone needs one I have a brand new radiator from napa in the garage text me a offer 7028587650

Anyone have an extra fan shroud? Mine is broke to all hell.

Finally gave in and built a new bumper. Not quite done yet though. I'll post more pics tomorrow

So on my gauge cluster the engine temp indicator(?) on the top left says my engine is over heated(it's all the way down on the right and won't Reset or whatever. I replaced the thermo last year. Any ideas why the needle won't "reset" Guys know what I mean? Any help?

So what you gonna do with the old one?