i had the same problem and it was my calipers. they seized up and i had to buy new ones. its all good now

 

Yeah I thought about mounting to the body first but I still couldn't line it up right. I tried backing the wheels into a curb a little and it worked but I went to far. I will need a 2nd person watching and to tell me when to stop so they can slide the bolt in to get it started.

I know its odd but I think it will work.

 

Yeah I thought about mounting to the body first but I still couldn't line it up right. I tried backing the wheels into a curb a little and it worked but I went to far. I will need a 2nd person watching and to tell me when to stop so they can slide the bolt in to get it started.

I know its odd but I think it will work.

 

I ripped out my headliner and suprisingly the road noise is the same. I mught loose some heat in the winter but the hot floorboards can counteract that.

 

PLUGS, FRONT WHEEL STUDS, SWAY BAR BUSH. FRT SPEAKERS. CD PLAYER, DIY K&N INTAKE

 

Finally got over to JY, and found a windshield washer bottle. 97+ the factory one is located inside fenderwell, and the ARB snorkle routes right thru is spot.

So after lifting about 50 car hoods I found the old Chrysler LeBaron/K Cars bottle was narrow and skinny and mounted up on the lefthand side of the engine compartment. Which it turn fits perfectly between the stock air box and power steering pump, added a few inches to the wires and tube (only need front washer for now) couple zip ties off power steering and done.

 

so i got my SYE installed, new lower control arm bolts for the TJ front end, switched out all the battery cables, and put the front driveline back on. all the front end needs now is new u joints, gear oil, and the ARB compressor. the rear end still needs bushings for the leaf springs, gears to be installed, locker to be installed, driveline installed, new shock mounts, and gear oil. thats about all thats left on my list to get her going.

 

New front/rear dif fluid. Pain....in....the....butt

 

I wasted 2 houors cleaning mud off, I don't know why i still go through that stuff.

 

had it towed with a surprising malfunction

 

Replaced all my coolant lines that were hacked together to get me home!!!

 

i got the ARB compressor installed and all the hoses and wiring and switches in place.

 

airbag light came on after removing console to get at handbrake cable.Is that an airbag module under there ? did i disturb something /help

 

My Jeep was the parts hauler all day long as the boy and I were working on getting his 4.56 gears installed.

 

sweet brian! i just got my timken install kit for my 4.56 gears and i am dropping it all off at my buddies house tomorow so he can install it. so is your son gonna go to naches with us?