Lucky, I have yet to find a 99+ intake at the JY. I picked up some injectors right after I got it, but they are shorter, and maybe too short to work.

 

Well it was a few days ago but i put on my new tires 35x12.50r15 Federal mud terrains. So far i love em. They cean out better than all my other tires. Ive ran km2, toyo mt, kevlar and interco (all of em) and these grab harder in all terrains and clean out even the sticky clay. Air them down and they become absolute monsters offroad! Best part is the price! They have a slight hop but are very tollerable and using a new silica compound (not equal)for balancing helped a ton, no more vibration. I dont like using stick on or clip on weights

 

Well my trxus' were the **** compared to the km2's... I've heard those are just junk on the road.

 

The km2 were ok on road but sucked *** in the mud. And the truxxus were awsome in sand n snow but turned to slicks in the mud. The on road manners are not a big deal for me. I ran swampers from the time i got my license 17 years ago til about 5 years ago when the radial mud tires started being good offroad. My federals are smooth and quiet up to 65-70 then get a decent vibe til 80-85. i run em at 25psi also

 

When i first mounted the federals i spun them on a dsp9000 balancer and the worst one wanted a total of 7.25 ounces, so not to bad for a lug happy 35 imho.

 

Took off the air cleaner and cleaned the throat and sensor, runs WWWAAAYYYY BETTER. Mounted my Mag light on console. Friday getting new shocks.

j

 

cleaned up and painted the new motor. perty








Then started the removal of my other engine from the jeep. =D

 

I bought four more Good year Kevlar 35`s for Old Red, Now I just gotta save up and buy an Super 30 kit and fix the front axle :-)

 

fixed this


and the yoke on the rear axle, and front and rear u-joints, a radiator flush, and drove it about 5 hours to sunnyside.

 

Lifted her up

 

Did some over head welding putting in my frame rails remember now why i need a welding coat got burns all over lol

 

Its a jeep, shoulda just flipped it over and welded it that way lol

 

Looks great man!

 

Thanks! Knocked the lift out in about 4hrs, not bad for a first timer :P (had some help of course) Now I just gotta test it out!

 

I don't wanna talk about how long mine took lol. Let's just say I should have canceled the insurance for how long it sat.. Lol!

If your snow run falls through tomorrow I'm leaving Centralia at about 7 for belfair, I gotta group of xj's and a couple tjs.