What did you do to your XJ today??
Yes they had the zinc plated bracket bolted to them. The mount holes didnt line up with my existing bump stop holes so I unbolted the bump stop from the bracket, drilled holes in the 2x2 tube, and bolted it to that. Check the pics again that I uploaded in my JF build thread.
Yes they had the zinc plated bracket bolted to them. The mount holes didnt line up with my existing bump stop holes so I unbolted the bump stop from the bracket, drilled holes in the 2x2 tube, and bolted it to that. Check the pics again that I uploaded in my JF build thread.
mounted my custom made proteck box behind the seat were the spare was. cleaned up some of the previous owners wiring mess.picked up a arb tire deflator. mounted the new whip.
Senior Member
Joined: Jul 2011
Posts: 798
Likes: 0
From: Mt. Vernon Washington
Year: 1991
Model: Cherokee
Engine: 4.0L Renix and tube header
Dove my '03 WJ down to Everett today, towing a 5x8 cargo trailer. On the way to drop it off the check Gage's light turns on and off. I get to the u haul rental place and drop off the trailer. When I try to restart the engine, I get signs of a dead battery. Had my buddy come get me and get a new battery. Later that day the same check Gage's light comes on and stays on, then a bunch of other lights turn on and the tranny starts shifting weird. So I stop at napa and get and alternator. Luckily I made it to my destination at 10pm, and don't have to break down and replace the darn thing. However as I pulled in the drive way, all the interior and dash lights went out
, lucky I felt. So in the morning I'll replace the alternator and fix the problem with a new battery too. The battery should still be good right?
, lucky I felt. So in the morning I'll replace the alternator and fix the problem with a new battery too. The battery should still be good right?


