Buck Needs an HP D30 Housing ASAP!!!!!!!!
CF Veteran
Joined: Dec 2010
Posts: 9,897
Likes: 2
From: shawnee,ks
Year: 1993
Model: Cherokee
Engine: 4.0
Originally Posted by BuckB91XJ
The link to whatever you were showing me did n't load up in your post. Please try it again, or PM it to me or heck just text the link to me @ (360)929-5518, Please.
http://rustysoffroad.com/mm5/merchan...ry_Code=BP-B_S
I didn't realise it didn't put on the link lol
Senior Member
Joined: Apr 2010
Posts: 615
Likes: 0
From: Bonney Lake, WA
Year: 1989
Model: Cherokee
Engine: 4.0 IL6
If the housing is not bent then I would say just weld on a new thicker LCA mount like these ones that I bought when I ripped off a LCA bracket. It's a pretty common break, the same thing happened to Cherokeefever and he also just bought thicker brackets and welded them on. The stock brackets are fairly thin and are only welded on from the outside. You can improve the stock brackets by welding them on the inside of the bracket, but they are still pretty flimsy and will eventually end up getting bent up on a rock. Even if you are dead set on a new housing I would still advise getting new brackets, as much as you wheel you are bound to have this break again unless you upgrade the brackets.
CF Veteran
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
yea just mark the location of your current mounts, and if you have adjustable lowers, then cut them both off and move them up out of the way to the back of the axle housing
Senior Member
Joined: Sep 2011
Posts: 972
Likes: 0
From: Burington Washington
Year: 1989
Model: Cherokee
Engine: 4L Renix
Senior Member
Joined: Feb 2010
Posts: 543
Likes: 0
From: Tacoma Washington
Year: 1988-1990
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Sep 2011
Posts: 972
Likes: 0
From: Burington Washington
Year: 1989
Model: Cherokee
Engine: 4L Renix
i live over in anacortes .
if you need some thing welded and have 220v at your place i am set up for tig welding. i have a 175 am tig torch and a 200amp welder .
also i could box these brackets on the housing i have and reinforce them. if you were to buy it and can pick it up as soon as i reinforce that lower bracket if you'd like then you can spend a after noon just swapping your parts into it.
just let me know
if you need some thing welded and have 220v at your place i am set up for tig welding. i have a 175 am tig torch and a 200amp welder .
also i could box these brackets on the housing i have and reinforce them. if you were to buy it and can pick it up as soon as i reinforce that lower bracket if you'd like then you can spend a after noon just swapping your parts into it.
just let me know
Thread
Thread Starter
Forum
Replies
Last Post
Blue94xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
Oct 27, 2024 12:13 PM
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Jul 8, 2023 07:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)