OOh. Dana 44 rear!!

Pics of engine bay and vac hoses etc?

 

Here's the back camper. Snugtop
Ripped out the nice black carpet and found surface rust.

 

Gettin there.

 

What the carpet looked like.
This is the column he took a light to, an said my check engine light was broken

 

 

 

Rite aid for the syringe was free, radio shack for the push button 4bucks,carb cleaner 3 bucks, cleaned up injectors two where none functioning.

 

Renix Vacuum Harnesses
The vacuum harness that attaches to the front of the valve cover and includes the grommet/fitting, and is called the front harness, is Napa part number BK 715-1367
　
　
The vacuum harness that is closest to the air cleaner, EGR etc, and is called the rear harness, is Napa part number BK-715-1366.
　
　
The tube from the rear of the valve cover to the intake manifold is part number 715-1365.
　
　
Revised 09-11-2012

 

cat numbers kinda see the weld

 

Here's the tranny saw lil oil and a open line? Idk

 

Gotta go running late.

 

PCV failed visual because the hose is split and cracked, the open line is a bleeder for I'm guessing the clutch slave cylinder. The converter looks like the right one its a walker converter and the EO and part numbers match but don't count on it being good just because its new, with this much CO it will kill a converter fast. I have one question where does the plug that is next to the throttle body looks like maybe three wires hook to?

 

Let's see the plug.

 

You can see it in post #50

 

4 wire plug, Square with 3 wires in it? TPS for a vehicle with auto trans has been installed on a manual trans equipped vehicle. It is not used then.