Won't Start After Full Service
#1
Newbie
Thread Starter
Join Date: Mar 2010
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 Litre
Won't Start After Full Service
Changed the con rod bearings, piston rings, plugs, etc (95 XJ 4.0) and now it won't start. There is fuel entering the combustion chamber and there is spark but it will not turn over.
Swapped the flywheel sensor, MAP sensor but it is the same problem. Suggestions?
Swapped the flywheel sensor, MAP sensor but it is the same problem. Suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
Tj Cope
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
11-16-2022 08:32 PM
seansr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
11-15-2022 06:08 AM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-24-2015 10:24 PM
Brynjaminjones
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-22-2015 05:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)