Ok so I swapped out my 2000 motor for a 96 motor after it blew up on me. It started out barely running it would stall out sometimes barely start or like this week it ran great for about 4 days now it won't start at all. The 96 had a distributor setup but I swapped all of that out and put in the coil pack setup. Like I said it ran but now nothing. It's turning but won't fire. Please point me in the right direction.

 

I'm no help but others can help I'm sure. The 96 model year was full of surprise's and changes not sure if anyone knows all of them. I'm sure there are a lot of things that wouldn't fit back on that block and heads and very surprised that only 2 wires not connected.

 

And another thing I just found a blown 20 amp fuse that could be for asd. Replaced the fuse and still nothing. I'm going to move on to the cps didn't really want to though.

 

Ok asd relay both 20 amp and 30 amp fuses cps all changed out. Still have a p.o.s. any advice?

 

There is a current thread running regarding wire issues under the box.
Do a search in Oem tech.