Red92XJ

ok so i've been having wiper issues for the past couple months an now that the rainy season is here i figured its time to start dinkin with them an get them working again...

So Befor id turn my wipers on an they wouldnt work. So i left them on an randomly when im driving they'd wipe one time then stop working again. So i pulled the circut breaker out (from the fuse box under driver side dash) an cleaned the prongs with a scotch pad an plugged it back in an waalaa my wipers are working now.

All speeds work but when i turn them to the off position they stop at the top of my windsheild an not the bottom...

Any ideas on why?

thanks anyone!

Fsher21

I have no experience with this subject, but since no one else is posting...did you put it in backwards? lol

odgreen

my guess is that the wiper motor has been replaced and the wiper transmission was installed wrong. as a mechanic i have seen it man times lol hope this helps

joelfett

could also be your bushings....mine stopped at the top AND right on the cowl frame when I had to replace mine a couple of years ago...hope this helps...

captainwoot

Possiblythe "park" switch in the wiper motor, contacts may be damaged internally