Parsnip

Hey yall,
So heres the issue- the windows wont move, and only the passenger side door lock works (all power). Ive checked out the wires and phsically they look good, i put a little dielectric grease on the connections, and im thinkong maybe the relay is bad? The 30 amp fuse which is supposed to be on my driver side fuse board is mia...either that or i just dont see it right in front of me...

Any help would be great! Its starting to get warm and the little window vents just wont cut it for long!

XJ Stryker

There is a write up in the write ups section on fixing this. A mod to make it run lots and lots better check it out. 1st or second page for XJ writeups.

Parsnip

I just read it, will actually do it after work tonight. Another question though, prior to them now working at all, they were EXTREMELY slow, as if the motor was barwly able to overcome the weight of the glass. Is this cleaning and such also supposed to fix that, or is that a regulator/ motor issue

XJ Stryker

I had to redo the ground wire for my main drivers window. It works faster. But when I replaced the motor I added a lil grease to the inside of where the window rides. And she shot up and down for a while. But has since gotten a little dirt in there and not so fast no mo.

Parsnip

Ok, so since i had 2 1/2 hours till work i decided to try this now...only think is that there are ford switches -.- i have no idea what to do, but the window lock switch i opened and its as clean as can be... so im just confused and a half now

XJ Stryker

oh you gots a old one like mines.

I would find the ground wire to each switch and then add a lead to the door with a self tapping screw at each window. I have read that helps our old tired renix wiring.

Parsnip

Just put another ground in...still nada :/

XJ Stryker

May be time to get another master then

Parsnip

Maybe...im gonna try grounding in a few diff spots because im not the worlds best electrician, but its also kinda odd how they both went simultaneously

XJ Stryker

Here is another write up i found while digging. Although it is geared for a 98 it may give you some ideas

https://www.cherokeeforum.com/f51/yo...ook-here-2531/