WILL 33" x 10.50 FITT???
Thread Starter
Member
Joined: Jul 2008
Posts: 106
Likes: 0
From: McHenry IL 60050
Year: 2000
Model: Cherokee
Engine: 4.0 V6
hello my fello cf members ive been talking about installing my leift for a while now and im finally going to start soon i found a good deal on rims and tires for my lift they are jeep rims on 33"x10.50 a/t
now heres my question my lift is only a 2"coil spacers, 2" rear shackles, and four rough country +2 shocks. i will post a few pictures just for the hell of it and i will start a built up tread as soon as i start my project.
okay back to the question with 33" tires and only 2" lift will it fit i now i might have to trim but trim what and how much?? i saw a jeep cherokee today that had 31" tires and it was stock without any trim so im hoping this will work
thanks for your replys
IIFF i do require any triming can some one post a link on how to trim or even a built up tread that they have did just so i can get a ideal of what im doing before i go cut up my jeep if i even have to..
here is a picture of my lift

here is a pictur of the RIMS (i dont own the tires on these rims)

here is the TIRES i will be putting on the jeep rims this week

thanks for your time my fellow CF members
now heres my question my lift is only a 2"coil spacers, 2" rear shackles, and four rough country +2 shocks. i will post a few pictures just for the hell of it and i will start a built up tread as soon as i start my project.
okay back to the question with 33" tires and only 2" lift will it fit i now i might have to trim but trim what and how much?? i saw a jeep cherokee today that had 31" tires and it was stock without any trim so im hoping this will work
thanks for your replys
IIFF i do require any triming can some one post a link on how to trim or even a built up tread that they have did just so i can get a ideal of what im doing before i go cut up my jeep if i even have to..
here is a picture of my lift

here is a pictur of the RIMS (i dont own the tires on these rims)

here is the TIRES i will be putting on the jeep rims this week

thanks for your time my fellow CF members
::CF Administrator::
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
You will have to do some major fender trimming to fit 33's on a 2" lift..31's are typically the max for a 2" lift...I have a 2" lift atm and I don't think 33;s would look to good nor fit very well without some major trimming and bump stops..
CF Veteran
Joined: May 2008
Posts: 2,680
Likes: 2
From: Virginia
Year: 1993
Model: Cherokee
Engine: 4.0L
I don't know about the frame but I wouldn't try with 33's! If you ever decide to lift it later it want look right. Plus gearing! Just get some 31's, lot easier and won't look all that bad.
Trending Topics
If you trimmed it enough to fit those tires it would look like a 4X4 that someone that was not concerned about looks owned. It can be done, but if you want the Jeep to look like a DD then you will not like it. It will look like a badazz rock buggy, not the sweet XJ you have now. 33" tires also bring gearing issues to the surface real fast. They WILL affect the way the XJ performs. Hope my $.02 worth helps, later!!
Thread
Thread Starter
Forum
Replies
Last Post
CAEMI
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
Jul 17, 2010 07:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)





