ok so i figured out my wheel hub was causing the wheel vibrations i've been having. Its even worse then i thought two of the three bolts have the heads broke off. Any ideas on how to get 19 year old bolts with the heads broken off out?

 

Are you talking about the wheel bearing?? If so the bolts are threaded into the bearing assembly, so if two broke just remove the third bolt and remove the hub. It will take some pounding to get it off.

 

heat and plenty of pb blaster also i took a cold chisel around the perimeter of the hub and a BFH it takes a lil bit and its a pain but once its off you need to make sure you use plenty of anti seize on all mating surfaces and bolts