what is this ?
Member
Joined: Nov 2013
Posts: 190
Likes: 0
From: Faiview,Pa.
Year: 1987
Model: Cherokee
Engine: 4.0 with 96 cam and 19lb.four hole injectors
well, with that thing literally in the way, the issue is: the whole load unto that jackstand comes unto that metal tab! And that tab is connected to a nut holding the trackbar bold. If that flag breaks, I'm f*d.
And it appears thin but its a surprisingly poor-bending thing...
Even with these new jackstands, only 3.5 cm wide but 3000 kg capacity, I still cant place them in that area...
And it appears thin but its a surprisingly poor-bending thing...
Even with these new jackstands, only 3.5 cm wide but 3000 kg capacity, I still cant place them in that area...
Thread Starter
CF Veteran
Joined: Jan 2012
Posts: 3,170
Likes: 312
From: Australia
Year: 1997 (RHD)
Model: Cherokee (XJ)
Engine: 4.0 ltr
Thread Starter
CF Veteran
Joined: Jan 2012
Posts: 3,170
Likes: 312
From: Australia
Year: 1997 (RHD)
Model: Cherokee (XJ)
Engine: 4.0 ltr
It's also in an angle where it meets the frame (unibody), so I'd reckon it puts the whole load on the bolt that goes through the LCA bushing..not a problem?