So here's my quagmire:

I have sagging leafs on my 1994 XJ; I'm planning on doing a 2" inch lift soon; but I am wondering if I should dump those leafs and get new leafs already set up for the lift or just AAL those leafs.

 

dont put a add a leaf in, all that will do is make them sag quicker, and probably just bring the rear up to factory height, just get new springs for a 2 inch or more lift.

 

Either that or get new stock springs (HD ones at suspensionking aren't to expensive) and then put a 2" AAL on it.

 

Hmmm....yeah....I'm leaning towards just putting in new stock leafs.

 

If ur gana do that go bigger and drop money on a 3in lift for 500?

 

X2

 

x3

2" isn't really worth the time/effort IMO.

 

Just go with a 3 inch full leaf pack

 

x2

 

I don't want to deal with the other issues with a 3" brings...2" is what I want.

 

What problems come with a 3in lift ? You don't need a tc drop or an sye..brake line extentions???

 

Its recommended on the 3" to do all that as I recall...and plus 2" is plenty for me...

 

At 3" you don't need an SYE. *If* you need a TC drop it consists of 4 generic bolts you can get at Lowe's and 4 spacers (which you can make out of a bunch of washers - also from Lowes).

Brake lines? At 3" you can probably bend the stock steel lines a little straighter and gain the length you need.

 

I'm not bending anything and sticking with the 2". No one is going to convince me otherwise.

 

Well damn