Vibration... Please help
#1
Newbie
Thread Starter
Join Date: Feb 2012
Location: Carlisle,Pa
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Vibration... Please help
i replaced the u joints in the rear but still have a vibration. would a bent crossmeber thats is on the transfer case throw a diffrent pinion angle and cause a vibration. i want a smooth ride. Any ideas???
#2
CF Veteran
yup, a bent cross member will definitely throw a vibe. is yours bent?
you could always remove the rear drive shaft and stuff a large to-go coffee cup on the end of the t-case and take it for a spin to see if the vibe goes away. (you'll need it in 4hi for this).
have your tires been balanced? do you have a bent rim? mud/ice stuck in the rim?
you could always remove the rear drive shaft and stuff a large to-go coffee cup on the end of the t-case and take it for a spin to see if the vibe goes away. (you'll need it in 4hi for this).
have your tires been balanced? do you have a bent rim? mud/ice stuck in the rim?
#3
Newbie
Thread Starter
Join Date: Feb 2012
Location: Carlisle,Pa
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
i dont think its the tires when im doing like 25 its smooth i love it when i do like 45 i have to like baby the throttle to get the vibe to go away. and yes my cross member is bent. i just purchased the jeep so not sure how it got bent.
#4
CF Veteran
start by changing out that cross member. being bent is changing the rear drive shaft angle. this can give you mad vibes.
Thread
Thread Starter
Forum
Replies
Last Post
JeepMoreDoor
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
07-21-2012 04:18 AM
path31
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-22-2011 03:34 PM
md1032
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
04-22-2009 12:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)