Geck_87Laredo

I was wonder what that hose is named that comes off the valve cover? It's the front one. On the XJ
Thanks!

Geck_87Laredo

ok i got it. It's a breather to the air box i think. Can anyone help me fine one online? All i need is the breather from the valve cover. I called the dealer and they sell it with a whoole bunch of other crap. Has anyone Just ordered the breather? She said i couldnt just get the breather.

mike albo

if you go on line go to www.teamcherokee.com thats were I get my hard to find parts.

rich

you get the whole peice together it dont cost that much,you should be able to afford it if you need it.

athenscj5

The Mopar name is the crankcase vent tube. The one in the front is PN# 5303 0991, the one in the back is 5303 0495. I had to replace the one in the front because I cracked it while I was trying to get it out so I ordered both of them plus the grommets they require(PN# 2946079). Total for all three parts was $21.13.

And some other mopar part numbers for all the pieces for the 2 different hoses for my 98. I guess they are the same for yours.

5303 0991--PN for the from outlet piece
5303 0495--PN for the rear outlet piece
2946 079--PN for the grommet for both pieces
4854 180-- Vent tube for front to the air cleaner box
4854 265--Vent tube for the back to the intake manifold

I had to go the dealer to get this stuff.

Geck_87Laredo

Sweet thanks man!! Ill call tomorrow and see what they have. I would guess they are the same! They wanted $185.00 for a whole kit of vacuum lines and crap as well as that tube.

Geck_87Laredo

So i found this.
http://www.quadratec.com/products/51309_1000.htm
but the bottom where it fits in the valve cover looks nothing like mine. How is it not going to move up and down? Mine has a tiny lip thats it and thats what is breaking but this one has like at least a 1" that looks as if it goes inside the valve cover??
someone help please.
Thanks.

Geck_87Laredo

any help?

athenscj5

Get a rubber grommet. See my above post.

Geck_87Laredo

I don't think the 97+ parts will fit on my 87 though. My brother in law said they are different. what do you guys think?