Using 95 header and motor on 01 xj
#1
Newbie
Thread Starter
Join Date: Apr 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Using 95 header and motor on 01 xj
Hey guys I just swapped in a 95 HO motor into my 01 xj, my stock manifold does not cover the exhaust ports. I wanted to use a 95 header and weld in a pipe from the header where the flange is down to the main cat and muffler. What would i need to do with the 02 sensors to make sure it properly runs. I know the 95 cherokee has 2 o2 sensors while the 01 has 4.
#2
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Hope you have the ECM from the 95 model and what else I do not know......but the good news is that a few here do know what you need and will chime in shortly hopefully.
Thread
Thread Starter
Forum
Replies
Last Post
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
05-21-2016 07:03 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
09-29-2015 06:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)