I've got pretty bad camber wear.. Still has my 2wd axle under the front right now which will be getting replaced in a few months but I cannot figure out why I have camber wear. All 4 ball joints have no play at all, and both front wheel bearings are tight.. What else causes wear?

 

Outside tread

 

Inside tread

 

Ball joints? Worn hub?

 

That is the new style though! Put a coffee can on your exhaust for 10 extra hp!

Totally teasing...

 

how would I check a work hub? Never thought of that!

 

You've got 2wd and I don't know the 2wd jeep axle set up well.


For the 4wd.

 

only thing is, if I try to move the tire by grabbing it at 9 and 3 or 12 and 6, the tire is solid.. No movement at all...

 

Bent axle?

 

I thought that, but both sides have wear.. The driver is just worse than the passenger side.. I can't think of anything else that would possibly cause it.

 

Does it somehow have adjustable balljoints?

 

I know I can get them but I don't believe it has them on it.. As far as I can tell they're not.

 

Would toe in cause camber-like wear?

 

This, if it affects both sides roughly the same.

 

not the same, drivers side is worse than the passenger.