Under dash lights on a 2000 xj
Thread Starter
Senior Member
Joined: Jan 2012
Posts: 720
Likes: 1
From: vanburen
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Does all the 97 to 01 xjs have the under dash footwell lights? Mine don't and don't see a plug someone post some pics of there's so I can see what I'm looking for.
I been replacing bulbs with led and wondered about the footwells since I see some that have it. Mine is a 2000 sport with the dummy light gauge cluster. Roll up windows
I been replacing bulbs with led and wondered about the footwells since I see some that have it. Mine is a 2000 sport with the dummy light gauge cluster. Roll up windows
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
I don't know about 97+, but pre-97 always has the plugin. The actual light itself was an optional feature.
I just installed some to my '92, you'll need mounts that screw into the lower dash. I will try and get pictures, but it's snowing out lol. the harness plugin may be a little hidden, the one for my passenger side was wrapped in foam with a few other plugs.
Make sure you find the plugins and remember what they look like before you go get the lights, there are several connector shapes.
I just installed some to my '92, you'll need mounts that screw into the lower dash. I will try and get pictures, but it's snowing out lol. the harness plugin may be a little hidden, the one for my passenger side was wrapped in foam with a few other plugs.
Make sure you find the plugins and remember what they look like before you go get the lights, there are several connector shapes.
Thread Starter
Senior Member
Joined: Jan 2012
Posts: 720
Likes: 1
From: vanburen
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
I don't know about 97+, but pre-97 always has the plugin. The actual light itself was an optional feature.
I just installed some to my '92, you'll need mounts that screw into the lower dash. I will try and get pictures, but it's snowing out lol. the harness plugin may be a little hidden, the one for my passenger side was wrapped in foam with a few other plugs.
Make sure you find the plugins and remember what they look like before you go get the lights, there are several connector shapes.
I just installed some to my '92, you'll need mounts that screw into the lower dash. I will try and get pictures, but it's snowing out lol. the harness plugin may be a little hidden, the one for my passenger side was wrapped in foam with a few other plugs.
Make sure you find the plugins and remember what they look like before you go get the lights, there are several connector shapes.
Thread Starter
Senior Member
Joined: Jan 2012
Posts: 720
Likes: 1
From: vanburen
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Best pic i could get with a 15degree windchill, i'll pull the dash off when it warms up lol.
It's just like the sockets for the turn signals, and the connector my jeep used is the one on the right with the Red and Yellow wires.
It's just like the sockets for the turn signals, and the connector my jeep used is the one on the right with the Red and Yellow wires.
Trending Topics
Seasoned Member
Joined: Oct 2010
Posts: 486
Likes: 2
From: Colorado Rocky Mountains
Year: 1999
Model: Cherokee
Engine: 4.0 I6
if you find a socket for the bulb, you can easily splice in some sweet 12v LED panels that are dirt cheap on ebay too. No need to worry about current draw even with multiples on one circuit since they're way less than an incandescent bulb by itself! Search "12v SMD panel" and look for the ones that have the adapter sets with them. I put them in my dome lights too - WAY brighter!
(That blue switch is my rear fogs, not the leds, btw.)
(That blue switch is my rear fogs, not the leds, btw.)
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
if you find a socket for the bulb, you can easily splice in some sweet 12v LED panels that are dirt cheap on ebay too. No need to worry about current draw even with multiples on one circuit since they're way less than an incandescent bulb by itself! Search "12v SMD panel" and look for the ones that have the adapter sets with them. I put them in my dome lights too - WAY brighter!
Thread Starter
Senior Member
Joined: Jan 2012
Posts: 720
Likes: 1
From: vanburen
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Just wired up some in my 94xj I went with red that's what I had! Still have not found the harnesses for the 2000 guess it don't have them?
Resident Pirate
Joined: Nov 2008
Posts: 3,877
Likes: 3
From: Orlando-Chickamauga
Year: 2001
Model: Cherokee
Engine: 4.0
bump on this, ive been looking in my 01 and havent found it, i'd really like footwell lights. anybody have a picture of what the 97+ footwell lighting harness/plug looks like?


