ok, not sure where to start! i have a 97 jeep cherokee country 4x4, i recently replaced the transmission with a jy one. this morning i finshed buttoning every thing up and went to crank it up and it will not start. it turns over but will not crank. when i bought it from the junkyard the guy made a big deal of where the torque converter was when i installed. from what i understand, if the torque converter wasnt correctly placed, i wouldnt have been able to bolt it up? so i guess my question is, is there something wrong with the trans that could cause this or do i need to start somewhere esle. side note, i can hear the fuel pump kicking on and i tried spraying starter fluid in it and still nothing happens.

thanks in advance!!

 

Check spark and fuel, also CPS.

 

You should probably check your sensors, cps-css, the cps might not be seated right after reinstallment.

 

It turns over but won't crank? I'm confused.

 

turns over but doesn't start, better?

 

I think he means cranks but doesnt turn over.

You knew what he meant.

 

Clearer. The crank sensor is most likely bad.

 

.

 

thats for the help and sorry about the confusion