Transmission and engine mounts
#1
Junior Member
Thread Starter
Join Date: Oct 2013
Location: Englishtown N.J
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 High Output
Transmission and engine mounts
I am replacing clutch and flywheel. Should I replace transmission mounts and engine mounts at the same time. Car has 230000 miles on it. What brand is recommended. Also what seals/bushings should I replace while the trans is out? Also, unrelated question.Is a Mopar oil filter good?
Thanks for any help.
Thanks for any help.
Last edited by charliek; 12-31-2013 at 01:03 PM.
#2
::Regional Moderator::
Join Date: Jul 2011
Location: Over here...
Posts: 2,912
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
If it's a daily driver just pick up what they carry at the parts store. Most likely they'll be Anchor mounts. I use Mopar filters on my 4.0L and never had a problem with them. You'll want to change the input and output seals at the very minimum or pick up a seal/bearing kit for it.
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)