transmission/cps and left blinker
Thread Starter
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
Can a cps be the cause of tranny slippage, could the kickdown cable be the cause too?
and
My left blinker turns on...only it doesnt blink. any suggestions?
and
My left blinker turns on...only it doesnt blink. any suggestions?
Junior Member
Joined: Sep 2008
Posts: 98
Likes: 0
From: Flagstaff, AZ
Year: 1996
Model: Cherokee
Engine: 4.0 I6
I had the same problem with my blinker, only I turned the Jeep off, turned it on again, and it worked fine. I don't think replacing the fuse would accomplish much, but then again im new to all of this..
The blinker thing happened to me right after I got an oil change, but just lik thaclav, I just turned it off and back on, back to normal.
Sometimes when I turn on my emergency flashers, they will stop flashing and stay on solid, kind of strange.
If it were a problem with the fuse, wouldn't it not come on at all?
Sometimes when I turn on my emergency flashers, they will stop flashing and stay on solid, kind of strange.
If it were a problem with the fuse, wouldn't it not come on at all?
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Blinker is probably a bad ground issue.
The tranny downshift and slipping is a TPS problem. On a 90 they are adjustable and yours is either worn or out of adjustment.
The tranny downshift and slipping is a TPS problem. On a 90 they are adjustable and yours is either worn or out of adjustment.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Feb 27, 2023 03:38 PM
Freda L. Worley Harris
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
Feb 15, 2020 04:37 PM
CJG
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 28, 2015 03:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



