alright guys so I am replacing the whole cooling system and the trans lines are leaking because the mj has been laid on its side, the upper control arm was shoved in the metal lines and it have pinched the, so now im getting all new lines. I thought I bought all i need but apparently I just bought both parts of the inlet tubes.... now I need the WHOLE return line the the trans..... PLEASE HELP ME FIND THE PART!

thanks,
Zeb

 

A transmission shop should be able to make one up.

 

Buy some tubing, a flair tool, tube cutter, tube bender (or rent one). It is easy, use your old tubing as a template.

 

There's 3 lines.

Local parts stores should have all three in the system.

Do you have an O'Reilly's near you?

 

NAPA sells them too.

 

ok guys I found the line i need it is part number dorman 624-300, and of course it is the most expensive one. Im going to go a head and pick it up I would like to go OEM on the trans lines. I have never made my own and I know that the stock lines will not leak because they are all metal and some pressurized fittings.