First off I used the search and couldn't find an answer specific enough. I have a 1995 XJ 2 door, 4.0ho, AX-15 manual, np231 that needs a new transfer case. I have a 1996 XJ np231 attached to an aw4 automatic along with driveshafts that I got with it when I bought it. My question is will the replacement be a direct swap or will I have to swap input shafts to make it fit the manual? I know that the outputs are different too but I have the driveshafts also so that should be fine, right? Thanks in advance for any help.

 

Im not 100% but I think you will have to change input. Look at NOVAC site it helped me alot.

 

T case will bolt right in

 

http://www.novak-adapt.com/knowledge/np242.htm

 

Ok there you go bolt in. Lol I know that link is for a 242 but should get to the 231 from there.

 

That Novak link is kinda confusing to me.

 

I will say it again.....

 

Lol

 

Ok. Thank you very much just wanted to be 100% sure before I tore into it.