I have a 2001 XJ that I need to remove the transfer case from. My SYE is on my transfer case and trans in my garage that were in my 96 XJ. I stated taking some bolts off and trying to seperate it from the trans but am struggling. It's sitting on the ground so access to everything is good there. You can see in my picture I did remove two nuts, but are these the correct ones ?

I believe taking the transfer case off my 01 while still in the vehicle will be somewhat challenging, it does have a 6.5" Long Arm lift on it, so I hope it being higher will help.

I'm going to work on this over the weekend and searched the site and the web for some good step-by-step directions but can't seem to find any.

Can you point me into the right direction...if you have any recommendations that would be great. I'd like to take pics and provide some good detailed directions for the next person.

Thanks in advance

 

http://www.pacificcoastmanuals.com/j...e_manuals.html

 

Those 2 nuts are correct. There are 6 of them altogether. Sometimes the stud will come out instead of the nut, that's okay.

 

Awesome, thank you...will pull off the rest today and hopefully it pops right out.