Trans mount
#1
Member
Thread Starter
Join Date: Jul 2010
Location: Easton, PA
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Trans mount
My friend has a 89 two door with a manual transmission. Well the mount is oil soaked, and torn in half. The mount is very big. Everytime he tries to buy one at a auto parts store, they try to tell him there is only one for all Cherokees. It is much smaller, and would bolt right into my 98 with an AW 4. Is this a dealer only mount?
#2
CF Veteran
Join Date: May 2009
Location: Glen Burnie, MD
Posts: 1,844
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
no, the mount you need is for a transmission that was made for only 2 years, then they ditched it for a much better transmission. the transmission you have is a:
Peugeot BA 10/5 speed.
it was built from 87-89 and was built by the french (that is why they ditched it in 2 years). the mount you need is like 80-90 bucks so it is expensive, but here is a link to the part you need.
http://www.autopartswarehouse.com/sk...%26+Drivetrain
good luck on your purchase.
Peugeot BA 10/5 speed.
it was built from 87-89 and was built by the french (that is why they ditched it in 2 years). the mount you need is like 80-90 bucks so it is expensive, but here is a link to the part you need.
http://www.autopartswarehouse.com/sk...%26+Drivetrain
good luck on your purchase.
Thread
Thread Starter
Forum
Replies
Last Post
jhamXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
11-09-2021 08:20 AM
riderjay253
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
09-27-2015 05:38 AM
Eyesell
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-22-2015 09:21 AM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-07-2015 08:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)