Track bar won't fit after 3 inch lift
#1
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: West Bloomfield,MI
Posts: 1,992
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L, CAI, Edelbrock Breather, Optima Yellowtop
Track bar won't fit after 3 inch lift
I can't get the holes on my track bar to match up with the holes on the mounting of the axle. I installed a 3 inch zone offroad lift and I just need to know how I'll be able to get some slack on it to place a bolt through and attach it to the passenger's side of the axle. I'm completely stumped on this one...
#3
aka Wade-O
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes
on
9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
put it all together including tires, minus the tracbar. set the jeep down on the ground. you should be able to steer one way or another and be able to line up the hole.
#4
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: West Bloomfield,MI
Posts: 1,992
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L, CAI, Edelbrock Breather, Optima Yellowtop
Alright sounds good I already got all those steps taken care of thank you for the input!
#6
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
did u use this turn ignition key to un lock steering have som on turn wheel with motor off in sert bolt dont forget to adjust the toe
#7
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: West Bloomfield,MI
Posts: 1,992
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L, CAI, Edelbrock Breather, Optima Yellowtop
Thanks everyone for the suggestions! I turned the wheel last night and got it all lined up and together!!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)