Track Bar
#1
Member
Thread Starter
Join Date: Nov 2009
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L
Track Bar
I just put a new rusty's track bar on yesterday and i noticed there was movement in the tie rod end of the track bar. when i turned the wheel it was dropping down and then going back up the the bolt was not moving up and down. it is inside where the knuckle is. what is wrong? is it just a faulty track bar?
#2
Junior Member
Join Date: Aug 2010
Location: Ridgecrest California
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
I have the same problem with mine!! took me a while to figure out what the clunk was every time I turned the wheel... so I went with the long shot idea to grease the tie rod end...still some movement but no more annoying clunking noise....let me know what you find out =)
#3
Member
Thread Starter
Join Date: Nov 2009
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L
yeah, i put some grease in it and i couldnt feel it through the steering wheel but it still does it. there wouldnt be like a little spring inside for the specific movement would there, i wouldnt think so.
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)