would it be safe to put a 32 11.50 on a stock jeep rim which are 8 inch rim i do belive... i was looking at mud kings and a set of craiger v-5 with a 3.75 offset

 

yeah they would fit on the stock jeep rim i believe. 11.50 may be a bit wide but i think it would look good. i've got 31x10.50 BFG all terrains on a mickey thompson 15x8 inch rim with 3-5/16 backspacing. they stick out alot further than stock but i put some bushwhackers on it so its fine.

 

yea i wasnt sure if it would put too much pressure or strain on the tire making it be necked down like that... plus it might bulg too much and rub whick is why i wanted the 3.75 spacing

 

well mine rubbed my stock fender flares off my XJ so i had to get something else, then i lifted it more so it wouldn't rub.

 

stock jeep rims are only 7 inches wide, but youll be ok. 12.5 you need 8 inches wide or better.

 

how much lift did you have when you had rubbing issues

 

this is when you trim and bumpstop, not lift it higher...

 

3 inch lift.

i didn't feel like trimming and didn't like my old OEM style fender flares and just felt like letting them get ripped off....didn't really care. i wanted the Bushwhackers. and i wanted more lift is why i lifted it more.....and yes i bump stopped. i'm sitting 4.5 now.

 

The charts at TireRack.com show the minimum recommended rim width for a 32X11.5 tire is 8". Obviously it can be mounted to a 7" but NOT recommended.

http://www.tirerack.com/tires/tires....=yes&tab=Specs