In short, the garage said I needed the driver side inner end, and showed me where it was. I went to autozone with this, and what they gave me definitely did not work. Could someone identify the tie-rod ends for me real quick?












Basically #2, the one that isn't there, is the most important. Thanks so much. I was told it was driver side inner.

 

#2 goes to the tie-rod end on the pitmon arm..

 

Yeah, I know where they all go... problem is, autozone/advance auto parts, both refer to them by either drivers side or passenger side, and then inner or outer.

 

i think they would consider that the drag link

 

#4 is the inner drivers side tie rode end
#1 is the outer

 

#1 is drivers outer, Moog part # ES3094L
#2 is passenger inner, Moog part # ES3096L
#3 is passenger outer,Moog part # DS1238
#4 is drivers inner, Moog part # ES3095R
The adjusting sleeve for passenger inner to outer is Moog part # ES2079S
The adjusting sleeve for drivers inner to outer is Moog part # DS1326S

 

Hey, thanks so much you guys.

 

i just did this today. what happens if i put the outer driverside on the inner and the inner driverside on the outer? i drover it and everything was good. any input? i just relized i did that by looking at these pics

 

Anyone?

 

If you are talking about the tie rod, nothing. It will work either way.

 

Ya I guess I swapped the 2. But cool that's means I dnt have t redo it