Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Thumping sound when stopping.

Thread Tools
 
Search this Thread
 
Old Feb 10, 2009 | 10:01 AM
  #1  
havensov's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2008
Posts: 847
Likes: 2
From: Battle Creek, MI
Year: '92
Model: Cherokee
Engine: 4.0
Default Thumping sound when stopping.

Recently when ever I am stopping I get this thumping popping sound the feels like its under my feet. Its only when I am nearing the end of my stop like under 10 miles an hour.

I have checked all the U-joints front and rear and they all are in good shape. I recently just had my front pinion bearing replaced, as well as the front drive shaft. I also just mounted my new wheels, all in the same day.

Brakes looked good when I was mounting the wheels, so I don't think that its those.

Anyone have any thoughts?
Reply
Old Feb 11, 2009 | 08:30 AM
  #2  
havensov's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2008
Posts: 847
Likes: 2
From: Battle Creek, MI
Year: '92
Model: Cherokee
Engine: 4.0
Default

Anyone? Come on...
Reply
Old Feb 11, 2009 | 08:34 AM
  #3  
okcjeeper's Avatar
::CF Administrator::
 
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default

My guess is u-joints, lose or bad calipers...You gotta figure if it's only popping when stopping first place to look is breaks then work towards other aspects that are coming to a stop at the point and could cause a binding issue to result such as axle u-joints or drive shaft u-joints.
Reply
Old Feb 11, 2009 | 08:37 AM
  #4  
havensov's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2008
Posts: 847
Likes: 2
From: Battle Creek, MI
Year: '92
Model: Cherokee
Engine: 4.0
Default

Hmm, all that came out when they were working on the axle... Wonder if one wasn't tightened down... Well guess I'm getting wet as i pull the wheels off...

Thanks!
Reply
Old Feb 11, 2009 | 08:39 AM
  #5  
okcjeeper's Avatar
::CF Administrator::
 
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default

Originally Posted by havensov
Hmm, all that came out when they were working on the axle... Wonder if one wasn't tightened down... Well guess I'm getting wet as i pull the wheels off...

Thanks!
Yeah if it happened after a shop did some axle work I'd be going back and make sure they tightened it all up. If not I'd be calling them back and telling them to fix it.
Reply
Old Feb 11, 2009 | 08:41 AM
  #6  
havensov's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2008
Posts: 847
Likes: 2
From: Battle Creek, MI
Year: '92
Model: Cherokee
Engine: 4.0
Default

Good point... and with any luck, JCR will not have anyone on the lift and i won't have to get wet checking it! Even if it turns out to be something else... LOL
Reply
Old Feb 11, 2009 | 09:22 AM
  #7  
XJ Stryker's Avatar
CF Veteran
 
Joined: Apr 2008
Posts: 7,661
Likes: 15
From: Smiths Station, Al
Year: 87
Model: Wagoneer
Engine: 4.0 I6
Default

Transmission Mount, they are prone to go bad after a few years. I have replaced both of mine and you will be surprised at the amount of vibes and knocks I don't hear anymore.
Reply
Old Feb 11, 2009 | 09:39 AM
  #8  
okcjeeper's Avatar
::CF Administrator::
 
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default

Yep I am about to replace mine this week if it warms up a bit. Easy to do as well.
Reply
Old Feb 11, 2009 | 12:49 PM
  #9  
havensov's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2008
Posts: 847
Likes: 2
From: Battle Creek, MI
Year: '92
Model: Cherokee
Engine: 4.0
Default

Son of a monkey's uncle!

Took the XJ done to JCR to have them look it over... Turns out the vibe is coming from a bad u-joint in the rear axle...

But to add to the fun, turns out one of the studs on the passenger wheel had stripped out and was just spinning... So they had to cut it off. But they were able to replace both the stud and lug... Thanks Evil Monkey!
Reply
Old Feb 11, 2009 | 01:04 PM
  #10  
okcjeeper's Avatar
::CF Administrator::
 
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default

Good deal you caught the studs that could have turned out nasty..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
56
Jun 12, 2025 02:04 AM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Oct 6, 2015 08:09 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
Oct 4, 2015 06:34 AM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
Oct 1, 2015 02:58 PM
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Sep 30, 2015 01:34 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:02 AM.