freshpow

hello good folks...i am new here but i like it !
who can help ?
i need to replace my temp-sending-unit to the gauge, and Jeep has the right part alright but for 50 bux (part#33001543)...ouch !
what after-market sender can i slap in there that will match my gauge ?
thx for any tips...cos the napa AZ and kragen recommend 5 or 6 of them and how do i know which one is the good one ?
XJ 1986 with 2.8 L

chadh92

I had a similar problem, don't know how much use i'll be here, but i'll tell ya my story.

My temp gauge never worked since I bought the Jeep. I went down to the auto parts store, picked up a temperature sending unit for like $18 (or $28...can't remember). I got home to put it on and it turns out it didn't even match the temp sending unit at the front of my engine (right above the center pulley). It was about half the size.

I take it back and they take a look. They saw it didn't match up, but only had one result coming up in their system. I refunded it and went to Napa. I got the right part there, put it on, but the temp gauge still wasn't working. I forgot about it for a week or two, then I opened up a Haynes manual and saw the connector was in the very back of the engine, and it was just unplugged. So that fixed it.

Moral of the story: Check your connector. If it's plugged in, go to Napa. Even the sales clerk at Autozone was like "hmm, at least now I know not to get mine here if it goes bad"

freshpow

thx for the story...your 96 is a very different animal than my 86...but i agree w you on Napa vs Zone...Napa seems a bit more on it !

chadh92

Yeah, I know I wasn't much help haha. Good luck

freshpow

thanx anyway my friend !