TCU interchange
#1
Member
Thread Starter
TCU interchange
This may be one for Crusier54 or anyone else with knowledge of the TCU used in 90 XJ's.
Did a lot of poken around the last few days, and testing. Seems like my TCU is shot or so indicated by the tests. Going to the junk yard in April to see what I can find. My question is "What years are interchangeable"?
Also what is a good brand of scanner to use, Amazon list all kinds of one's??
Did a lot of poken around the last few days, and testing. Seems like my TCU is shot or so indicated by the tests. Going to the junk yard in April to see what I can find. My question is "What years are interchangeable"?
Also what is a good brand of scanner to use, Amazon list all kinds of one's??
Last edited by HappyPappy; 03-20-2015 at 01:37 PM.
#2
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
It's pretty rare, but they do fail. It's way more likely the TPS is bad or out of adjustment. Mine was replaced by a professional shop that didn't adjust it! (the PO did that). Also it has a fuse on the harness near the TCU.
Cruisers tips are right on top in my sig. Checking/cleaning grounds and following the TPS adjustment instructions would be a good start if you are having shifting issues. 87 to 90 probably interchange....
Cruisers tips are right on top in my sig. Checking/cleaning grounds and following the TPS adjustment instructions would be a good start if you are having shifting issues. 87 to 90 probably interchange....
Thread
Thread Starter
Forum
Replies
Last Post
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
Snajo
Other Vehicles. Other Jeep models & cars and trucks of other makes
0
09-26-2015 11:54 PM
carson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 08:26 PM
miltontl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-01-2015 12:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)