Hey guys I was wondering if anyone here had a detailed diagram of the NP242 T-Case. If you have one or know where I can find one for free please let me know!!

 

here is a site for the internals of a NP242: http://www.drivetrain.com/parts_cata...rts/np242.html

Also if you're going to rebuild your T-case there's a good 3 or 4 part video on youtube for a dodge dakota. the author is 9x19. I watched it a couple times when I rebuilt mine. Take note of the torque specs too. good luck.

 

not rebuilding trying to switch the front output seal but twice now NAPA has ordered the wrong seal...Im looking for a diagram so I can make sure Im doing this right. I dropped the front D/S, removed the yoke on the t-case and the old seal was soo worn is pretty much just fell out onto the floor in 10 pieces. After I remove the yoke is there anything else I need to take off? The seal from what I understand just slides over the output shaft and into place right?

 

Yes that is all,just make sure area is clean and apply a small film of silcone to the seal and replace it,instructions say to use new waher,I am not sure that is needed.