T-Case Drop on Stock Xj?
05-13-2010, 09:34 PM
#1
Seasoned Member
Thread Starter
Join Date: Jan 2009
Location: Lovettsville, VA
Posts: 375
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
T-Case Drop on Stock Xj?
Would there be any problem with this? Put on new exhaust and it's rubbing the crossmember. I don't know of any other way to keep it from hitting.
05-13-2010, 09:37 PM
#2
CF Veteran
Join Date: Jun 2009
Location: Michigan
Posts: 2,128
Received 287 Likes
on
237 Posts
Year: 1987 MJ, 1998 XJ, 1973 J2000, 89 waggy
Model: Comanche (MJ)
Engine: 4.0L H.O
there should actually be an isolator hanger the mounts right above the cross member and on the passenger side of the t-case, get that mounted correctly or if you don't have one, get one then hand it and you'll be all set
05-13-2010, 09:42 PM
#3
Seasoned Member
Thread Starter
Join Date: Jan 2009
Location: Lovettsville, VA
Posts: 375
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
Do you mean the exhaust hanger towards the tail end of the front pipe? Mine has one on there and it is attached the only way I see possible.
05-13-2010, 09:54 PM
#4
CF Veteran
Join Date: Jun 2009
Location: Michigan
Posts: 2,128
Received 287 Likes
on
237 Posts
Year: 1987 MJ, 1998 XJ, 1973 J2000, 89 waggy
Model: Comanche (MJ)
Engine: 4.0L H.O
the tail end of the front pipe.....
is that like the back end of the front or the top side of the bottom?? lol
where are you talking about whats is it by?
is that like the back end of the front or the top side of the bottom?? lol
where are you talking about whats is it by?
05-14-2010, 07:36 AM
#6
Seasoned Member
Thread Starter
Join Date: Jan 2009
Location: Lovettsville, VA
Posts: 375
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
My XJ only has two pipes, the front pipe and the tail pipe. The piece that is rubbing is the front pipe and it is hiiting the crossmember for the transfercase. I'm just looking for ideas on how to fix this. The only idea I have had is to lower the crossmember about 1/4" but didn't know if it would cause any problems on a stock xj (driveline angles). I'd appreciate any advice!
Thread
Thread Starter
Forum
Replies
Last Post
jeefersjeepers
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-20-2023 12:51 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
lil01cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-10-2015 05:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
