i think i saw a thread on makein ur own quick disconects but i cant find it back anybody make there own?
CF Veteran
heres a write up a buddy of mine did a while back.
http://www.capitaljeeps.com/xjtech/d...bardisco.shtml
http://www.capitaljeeps.com/xjtech/d...bardisco.shtml
CF Veteran
You can also do this...
http://www.go.jeep-xj.info/HowtoSwaybarlinks.htm
But basically:
replace the 15mm nut with a 10mm wing nut.
Then replace the 55 torx bolt and 18mm nut with a hitch pin bolt and washers.
http://www.go.jeep-xj.info/HowtoSwaybarlinks.htm
But basically:
replace the 15mm nut with a 10mm wing nut.
Then replace the 55 torx bolt and 18mm nut with a hitch pin bolt and washers.